Zing MPS

by EasyStand

The Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction. The Zing MPS is available in two sizes (1 and 2)

Overview Specifications Order & Delivery Manufacturer

Features

30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.

Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.

Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS Size 1 is a comfortable 31″ from the floor surface.

Remarkably Modular
With 75 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS one of the few multi-position standers that can accommodate contractures on one or both sides.

Specifications

Size 1
Basic Unit	Imperial
Height Range	up to 44”
Weight Limit	70 lbs.
Transfer Height( Horizontal Position )	32”
Center of Pelvic Support to Footplate Range, may invert footplates as necessary	7″ – 22”
Upper Body Support Height Range	4”
Kneepad Depth Range	5”
Kneepad Inside Width	2.5”, 3.25”, 4.25″, 5″
Kneepad Dimensions

2.5	3.5”x4”
3.25	4”x4”
4.25	4.5”x5”
5	5”x6”
Multi-Adjustable Knee pads Width Range, Center-to-center
2.5	4”- 9”
3.25	4.5”- 9”
4.25	5” – 8”
5	6” – 7”
Multi-Adjustable Knee pads Height Range	+/- 0.75”
Weight of basic unit	55 lbs.
Frame footprint, Caster-to-caster	20” x 28”
Maximum Dimensions	21.5 x 29.5
Upholstery	Black nylon/Neoprene or Molded Urethane
Hygienic Covers	Polyurethane Laminate ECO-PUL
Frame color	Green, Purple, Orange, or White
Casters and Wheels	3’’ diameter
Lifting mechanisms Available	Gas Spring
Lift Options	Dual Control (hand lever) Lockout Knob
Options and Accessories
Supine positioning/ Prone-Forward positioning. Supine, MPS, TT	Supine 0-90 degrees/ Prone 0-20 degrees
Positioning, Prone Model	90 (vertical) to 0 (horizontal)
Positioning, Vertical Model	90 (vertical) only. Fixed position.
Leg Abduction	30 degrees per side
Foot straps extra small – length over arch	8”
	10”
Secure Foot straps – length over arch	Available in same lengths as regular foot straps
Footplate Options LxW	6.00” L x 3.00” W
	7.75” L x 3.25” W
	9.75” L x 4” W
Footplate, platform style	8”L x 12.00” W
Multi-Adjustable footplates – Plantar/Dorsi	+/- 20 degrees
Multi-Adjustable footplates – Fore/Aft	+/- 0.75”

Multi-Adjustable footplates rotation	30 degrees left/right

Single Calf Pad/Leg Rest	4” x 13.5”
Single Calf Pad Strap, Fits circumference	24”
Calf (Behind knee) Pad Option,Extra Small Pad Size, Small Pad Size, Fore/Aft Adjustment from seat plane	3.5 x 3.5 inches, 4.5 x 4.5 inches, -1 to +4 inches
Independent Planar Leg (Calf) Support Tilt Table (TT) Pads – 3 sizes	4” x 6”, 6” x 6”, 8” x 6”
Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap – Fits circumference:	Up to 15”
Table Mount and Tray Options/Specs	Posterior Support Models (Supine, MPS, TT)
Shadow Tray size – Molded/Acrylic	11”x19”
Shadow Tray height range	3”
Shadow Tray Fore/Aft range (from posterior pad to chest pad)	0” – 10”
Swing-Away Tray size – Molded/Acrylic	11”x19”
Swing Away Tray Height Range	3”
Swing-Away Tray Fore/Aft Range (from posterior pad to chest pad)	4”- 9”
Swing-Away Tray Angle Adjust Range	+40 degree inclines to -90 degrees (parallel to user when standing or in supine mode)
Upholstery/Positioning Options/Specs
Hip support pad size	3.5”H x 3.5”W
Hip supports width range	6” – 10”

Lateral support pad size	3.5”H x 3.5”W
Lateral supports width range	7” – 11”

Lateral supports height range	3.5”
Lateral supports Fore/Aft Range	1”
Pelvic Support Planar (2 sizes) All Configurations	5×7” 5×9”

Pelvic Support, Form-to-Fit (2 sizes) Posterior support (Supine, MPS, TT)	5″x7”, 5″x9”


Pelvic Support Form-to-Fit (2 sizes) Anterior Support (Prone and Vertical)	5″x10”, 5″x12”
Upper Body Support Planar	5″x5” (Anterior only), 5”x7”, 5”x9”, 7″x7”, 7″x9”
Upper Body Support Form-to-Fit	5”H x 10”W, 5”H x 12”W, 7”H x 10”W, 7”H x 12”W
Upper Body/Pelvic Tilt Table (TT) Pads – 3 sizes	14”L x 14”W 16”L x 14”W 18”L x 14”W
Chest Pad	3”Hx8”W
Chest Strap (pad size)	5″Hx8”W
Chest Strap (approximate user circumference)	Up to approx. 24”
Chest vest – X-Style	9.5”Lx9”W
Chest vest – X-Style	11”Lx9.5”W
Posterior Head Supports (Supine, MPS, TT)
Head support height range. (From top of upper body pad)	8”
Head support depth range – from backrest	-2.5” to +1.5”
Head Support Size Extra-Small	5” H x 8” W Cushion
Head Support Size Small	6” H x 10” W Cushion
Flat Headrest	5” H x 7” W
Form-to-Fit Head Support – Height, Width, variable up to approximately:	5”, 10”
TT Planar Head Support	8” H x 8.5” W

Anterior Head Supports (Prone, Vertical)
Face Aperture	2 – 3 x 9” Pads
Positioning belt – hip circumference	Up to approx.. 24”
Configurations Available:
Supine	Posterior Support Pads
MPS (Multi-positional Stander, w/Prone Forward)
TT (Tilt Table, larger upholstery surfaces)
Prone	Anterior Support Pads
Vertical (fixed position, no lift options available)

Size 2
Basic Unit	Imperial
Height Range	40” to 60”
User Weight Limit	154 lbs.
Transfer Height (Horizontal Position)	31”

Center of Hip to Footplate Range, Maximum, may invert footplates as necessary	34”
Upper Body Support, Vertical Adjustment Range (7 settings)	6”

Approximate Equipment Weight of basic unit, in a minimally equipped usable configuration, less most options	82 lbs
Approximate Equipment Maximum Weight, Fully optioned unit	145 lbs.
Frame footprint, Caster-to-caster	26.75” x 39.75”
Maximum Dimensions	28.75” x 41.75”
Upholstery	Black nylon/ Neoprene or Molded Urethane
Hygienic Covers	Polyurethane Laminate ECO-PUL

	Multiple Patterns Available, see literature or website

Frame color	Green, Purple, Orange, or White, Medium Gloss Polyester Powder Coat
Casters and Wheels	3’’ diameter

Lifting Mechanisms Available	Gas Spring

	Pow’r Up (Electric)
Lift Options, if equipped with Gas Spring	Dual Control (hand lever)

	Lockout Knob

Options and Accessories
Supine positioning/“Prone-Forward” positioning. Supine, MPS, TT	Supine 0-90 degrees/ Prone 0 to 20 degrees forward
Positioning, Prone Model	90 (vertical) to 0 (horizontal)
Leg Abduction	Up to 30 degrees per side

Feet
Foot straps – length over arch	10”
	15”
	21”
Secure Foot straps – length over arch	Available in same lengths as regular foot straps

Footplate Options L x W	7.75” x 3.25”
	9.75” x 4”
	11.75” x 5”
Footplate, platform style	11.5” L x 16.75” W


Multi-Adjustable footplates – Plantar/Dorsi	+/- 20 degrees
Multi-Adjustable footplates – Fore/Aft	+/- 0.75”


Multi-Adjustable footplates rotation	30 degrees left/right

Knees
One-piece Calf Pad / Leg Rest	17.5” x 5.5”
One-piece Calf Pad Strap, Fits Approximate circumference	28” to 38”
Kneepad Depth Range (from seat plane)	From tight against plane to +7”

Kneepad Options, Inside Width	3.25”
	4.25”
	5”
Kneepad Dimensions (Height x Outside Width)
3.25	4” x 4”
4.25	4.5” x 5”
5	5” x 6”
Multi-Adjustable Kneepads Width Range	From tight together to 17.25” outside-to-outside
Multi-Adjustable Kneepads Height Range	Infinite from footplate to pelvic pad
Calf (Behind knee) Pad Option
· 4.5”	4.5 x 4.5 inches

· 5.5”	5.5 x 5.5 inches

· Fore/Aft Adjustment from seat plane	+3” / -2”
Independent Planar Leg (Calf) Support Tilt Table (TT) Pads	9” H x 7.5” W

3 sizes	12” H x 7.5” W

	15” H x 7.5” W
Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap.	19”

Fits approximate circumference:
Table / Tray	Posterior Support Models (Supine, MPS, TT)
Shadow Tray size Molded/Acrylic	21” x 24”
Basic Shadow Tray Height Range, referenced from hip pivot:	+4” to +7”
Basic Shadow Tray Fore/Aft range (from posterior pad to chest pad)	0.5” to 12.5”


Note: Form-to-Fit Upper Body Supports, Lateral Configuration, and Tray Elbow Pads may reduce tray ranges or introduce interferences. A demo or fitting is always recommended when specifying a highly configured product.


Swing Away Tray Height Range, referenced from hip pivot:	+4” to +7”




Swing Away Tray Fore/Aft Range (from posterior pad to chest pad)	4” to 16”
Swing Away Tray Angle Adjust Range	-90 to +90 Degrees
Chest Pad, Tray Mounted	3” H x 8” W
Elbow (Cutout) Tray Pads

– Inside Width	9.25”

	11”

	13”

Upholstery/ Positioning Options/ Specs
Hip Supports
Hip support pad size	4.5” x 4”
Hip supports width range	7” to 13”

2 sizes	12” to 18”
Hip Support, TT, Width Range	10” to 16”
Lateral Supports
Lateral support pad size	4” x 6”
Lateral supports width range, Supine & MPS – 2 sizes (4” of adjustment. Ranges vary based on pad width)	7” to 11” (11” pad)

– 11” wide upper body pad	10” to 14” (11” pad)

– 13” wide upper body pad	9” to 13” (13” pad)

	12” to 16” (13” pad)
Lateral Supports w/Elbow Stops and/or Arm Rests, Supine and MPS Only.

Width Range including optional pad holes

w/ 11” Wide Pad	10” to 17”

w 13” Wide Pad	12” to 19”


Lateral supports, TT, width range	10” to 16”
Lateral supports, Prone, width range

– 7” wide upper body pads	7 to 12”

– 9” wide upper body pads	9 to 14”
Lateral supports height range	4”

	8” by swapping L/R
Lateral supports Fore/Aft Range	1”

Trunk and Torso Pads
Pelvic Support, Planar and Form-to-Fit	10” H x 11” W

(2 sizes each)	10” H x 13” W

Supine / MPS


Main Support Pad, TT, Planar	19” H x 16” W

(3 sizes)	22” W x 16” W

	25” W x 16” W
Upper Body Support, Planar and Form-to-Fit	8” H x11” W

(2 sizes each)	8” W x 13” W

Supine / MPS
Prone Pelvic Anterior Support

Planar	10” H x 11” W

	10” H x 13” W

Form-to-Fit	10” H x 11” W

	10” H x 13” W
Prone Upper Body Anterior Support

Planar	5” H x 7” W

	5”H x 9”W 7”H x 7” W 7”H x 9”W 5”H x 12”W 7”H x 12”W 10”H x 13”W





Form-to-Fit







Positioning/Chest Strap (pad size)	6” x 10”
Positioning Strap and Chest Strap Options
Catalog Number	Actual Capacity
	Inches
PA3011	29
PT30066	35
PA5610	29
PB5542	35
PA3062	45
PB3052	57
PB5592	45
PB5594	57
PB5596	45
PB5598	57


Chest vest – X-Style	11” L x 9.5” W
– X-Style	14.5” L x 10.5” W
-Y Style Vest	17.5” L x 11.5” W
-Y Style Vest	20.5” L x 12.5” W

Posterior Head Support
Head support height range. (From top of upper body pad.)	1” to 10”
Head support depth range – from backrest	-3.5” to +1”
Head Support Options	5” H x 8” W
	6” H x 10” W
	7” H x 14” W
Form-to-Fit Head Support

Height	5”

Width, variable up to approximately:	10”
TT Planar Head Support	9” H x 10” W

Anterior Head Support (Face Prompt)
Prone Model Only. 2 pads. Pad Size.	3 W x 9” H

Question about the Zing MPS ?

Call 1-844-821-0075 and request details about the Zing MPS.

View our service area for Lower Mainland or Vancouver Island delivery. Learn More